-
Toutes les catégories
-
Mouvements d'horloges
-
Outil d'horloger et besoin d'atelier
-
Adapter & Schließen für Apple Watches
-
Réparation d'horloges
-
Werkzeugsets für Uhrmacher
-
Bergeon
-
Outils de modélisme
-
Serrage, bander, perçage, vissage
-
BALLISTOL - Es wirkt.
-
TOWN TALK nettoyer et entretenir
-
CONNOISSEURS
-
HAGERTY Nettoyage + Entretien
-
SELVA Uhrenarmbänder
-
HAPPEL bracelets pour les montres
-
Piles
-
KWM Système de bouchons
-
Mesurer, tester et peser
-
PRO'SKIT
-
BRÜDER MANNESMANN
-
s.Oliver bracelets de montre-bracelet
-
Machines et accessoires de trovalisation
-
Remontoir d'horloge et cassette de bijouterie
-
Piles
-
Transformation et entretien du bois
-
Outil électrique
-
Adhérer
-
LIQUI MOLY
-
Soudure et braser
-
Outil électrique PROXXON
-
Nettoyer et soigner
-
Nettoyage par ultrasons
-
Meulage, affûtage et polissage
-
Réparatie de bijoux
-
Découper, scier, couper
-
Bracelets
-
Adapter & Schließen für Apple Watches
-
Horloges et montre-bracelets
-
Fabrication et conception
-
Instruments optiques
-
Technologie d'alarme et de sécurité
-
Instruments météorologiques
-
Connaissance de spécialiste et littérature
-
Bijoux
-
Verres d'horloge
-
Idée de cadeau
-
GRS Gravieren
-
Nouveautés
-
3D
-
Selva Fachtipps
-
Manufakturwerk
-
Mouvements d'horloges
Réf. produit :
219934
Informations sur le produit "Proxxon appareil de division"
La tête de division de PROXXON. Idéal pour les microfrills MF 70 et KT 70.
Pour l'usinage de pièces circulaires, la réalisation de trous et découpes à décalage radial, le fraisage de méplats de clé, de bords carrés, de bords hexagonaux, etc. Séparation précise par vernier sur le corps de base.
Mandrin à mâchoires réversibles: plage de serrage à l'intérieur de 1,5 à 32 à l'extérieur de 12 à 65 mm. Passage d'alimentation 11 mm (pour travailler des arbres plus longs en position verticale). Avec des trous de montage pour un montage horizontal et vertical ainsi que des écrous à fente appropriés et des vis de montage pour le montage sur le routeur MICRO MF 70 et la table de coordonnées MICRO KT 70. Livré dans une boîte en bois avec couvercle coulissant.
Séparation précise par vernier sur le corps de base
Passage d'alimentation de 11 mm
Avec trous de montage et vis
Plage de serrage interne: 1,5 à 32 mm
Plage de serrage extérieur: 12 à 65 mm
Taille: 72 x 64 x 38 mm
Pour l'usinage de pièces circulaires, la réalisation de trous et découpes à décalage radial, le fraisage de méplats de clé, de bords carrés, de bords hexagonaux, etc. Séparation précise par vernier sur le corps de base.
Mandrin à mâchoires réversibles: plage de serrage à l'intérieur de 1,5 à 32 à l'extérieur de 12 à 65 mm. Passage d'alimentation 11 mm (pour travailler des arbres plus longs en position verticale). Avec des trous de montage pour un montage horizontal et vertical ainsi que des écrous à fente appropriés et des vis de montage pour le montage sur le routeur MICRO MF 70 et la table de coordonnées MICRO KT 70. Livré dans une boîte en bois avec couvercle coulissant.
Séparation précise par vernier sur le corps de base
Passage d'alimentation de 11 mm
Avec trous de montage et vis
Plage de serrage interne: 1,5 à 32 mm
Plage de serrage extérieur: 12 à 65 mm
Taille: 72 x 64 x 38 mm
Application: | Teileapparat für Xenox |
---|---|
Contenu Unité de mesure: | Stück |
Dimensions extérieures Hauteur mm: | 38.00 |
Dimensions extérieures Largeur mm: | 64.00 |
Dimensions extérieures Longueur: | 72.00 |
Marque: | Xenox |
Nom de l'article: | appareil de division |
Poids brut Gramme: | 0.00 |
Sommaire: | 1.00 |
Unité de mesure Longueur: | mm |